Filter
Top Products
DPP-FP85/FP95 3-285-420-12 (1)
79
GB
Additional information
D:\Printer\DPPFP85.95 series\IM\3285420121DPPFP85.95IM_GB\3285420121\3285420121DPPFP8595IM_GB\110ADD.fm
Master: Right.L0
Additional information
Precautions
• Be careful not to set or drop any heavy
objects on the power cord, or to damage the
power cord in any way. Never operate this
printer with a damaged power cord.
• Should any solid object or liquid fall into the
cabinet, unplug the printer and have it
checked by qualified personnel before
operating it any further.
• Never disassemble the printer.
• To disconnect the power cord, pull it out by
the plug. Never pull the power cord itself.
• When the printer is not going to be used for
an extended period of time, disconnect the
power cord from the wall outlet.
• Do not handle the printer roughly.
• To reduce the risk of electrical shock, always
unplug the printer from the electrical outlet
before cleaning and servicing the printer.
• Avoid placing the printer in a location
subject to:
–vibration
– humidity
– excessive dust
– direct sunlight
– extremely high or low temperatures
• Do not use electrical equipment near the
printer. The printer will not work properly in
electromagnetic fields.
• Do not place heavy objects on the printer.
• Leave enough room around the printer so
that the ventilation holes are not blocked.
Blocking these holes may cause internal heat
build-up.
On the AC adaptor
• Be sure to use the AC adaptor supplied with
the printer. Do not use other AC adaptors, as
this may cause a malfunction.
• Do not use the supplied AC adaptor for other
devices.
• In case the cord of the AC adaptor is
damaged, do not use it any longer, as this
may be dangerous.
On moisture condensation
If the printer is brought directly from a cold
location to a warm location or placed in an
extremely warm or humid room, moisture may
condense inside the unit. In such cases the
printer will probably not work properly and
may even develop a fault if you persist in using
it. If moisture condensation occurs, unplug the
AC power cord of the printer and do not use the
printer for at least one hour.
On transport
When you transport the printer, remove the ink
ribbon, paper tray, AC adaptor, the memory
card, or an external device from the printer and
put the printer and its peripherals in the original
box with the protective packaging.
If you no longer have the original box and
packing parts, use similar packing material so
that the printer will not be damaged while
being transported.
On safety
On installation
Continued