Filter
Top Products
96
GB
Using your printer with Windows computers
Note on DPP-SV88 software installation for the customers using
Sony DPP-SV55/SV77 digital photo printer
When you have already installed the Sony DPP-SV55/SV77 printer driver or
reader software onto your computer with Windows 98/98SE/Me operating
system, your computer cannot detect the DPP-SV88 connected via USB port as
new hardware. Follow the procedures below to change the DPP-SV55/SV77
USB driver into the DPP-SV88 USB driver. Then run “Setup.exe” contained in
the CD-ROM supplied with the DPP-SV88 to install the software.
Once you have changed the USB driver, you can connect and use the DPP-
SV55/SV77 as well as DPP-SV88. The DPP-SV55/SV77 is displayed as DPP-
SV88 on your computer, which is no problem.
1
Start Windows, turn on the printer and connect the printer
with the computer via USB port.
2
Click “Start” from the Windows taskbar, point to “Settings”
and then click “Control Panel.”
3
Double-click “System” to open the “System Properties”
window.
4
Open the “Device Manager” tab, select “Sony DPP-SV55 USB
Digital Photo Printer” or “Sony DPP-SV77 USB Digital Photo
Printer”under the “Universal serial bus controller” and then
click “Properties.”
5
Open the “Driver” tab and click “Update driver.”
6
Click “Next.”
7
Click “Display a list of all the drivers in a specific location, so
you can select the driver you want” and then click “Next.”