Filter
Top Products
CV503-8CH-19M
22
SVAT ELECTRONICS
now you can see
MAIN MENU
NETWORK SETUP MENU
The network setup menu is your gateway to viewing your
footage online. This menu holds the information you need
to set up on-line viewing. The DVR is pre-congured to work
with most basic network setups and the values shown on
the screen are the values you will be using to setup and view
the DVR on a computer.
The network setup menu allows you to congure all
the settings necessary to view your DVR online. You can
congure the way the DVR acquires an IP address, adjust
which ports are used to communicate with the DVR, adjust
your DNS as well as set your information for a DDNS account.
Network Menu
Type:
Determines how the LCD-DVR will acquire and IP address: DHCP, Static IP or PPoE.
DHCP:
Dynamic Host Conguration Protocol (DHCP) is the most common setup for
home or oce networks. This allows the LCD-DVR to automatically acquire an IP
address from the router. By default, the IP mode will mode will be set to DHCP.
Static IP:
Static IP addresses are manually assigned by the administrator. A static IP
address would be benecial if your internal IP changes frequently.
PPPoE:
Used for DSL services where individuals connect to a DSL modem. It is
recommended to store PPPOE information in the router. If the information is
not stored in the router, the DSL model will need to be congured. Contact your
Internet Service Provider for details on modem conguration.
To adjust the type of IP Mode you are using:
1. Select the drop down menu beside the word TYPE.
2. Highlight the IP Mode you would like to use and press select.
3. Select “apply” to save your changes.