Filter
Top Products
CREATING LINES
35
6. The Right setting places a line at the far right side of the label.
7. The @ Pages setting places lines between each page of a label that has
multiple pages defined. The @ Pages setting is used for patch panel,
outlet, and terminal block labeling.
Creating a Line Tool
The line tool should be accessed from the home screen. To access the line
tool:
1. Press the key to enter the tools menu.
2. Press the right directional arrow key and then press the down directional
arrow key to highlight the line tool.
3. Press the key to select the line tool.
4. Use the up or down directional arrow keys to select the desired line
position.
5. Use the right or left directional arrow keys to turn on or turn off the line
tool at the selected position.
6. Press the key to accept the changes and to return to the home
screen. Otherwise, press the key to return to the home screen
without accepting changes.
7. On the home screen, the line tool icon will appear on the right side of
the display when the line tool is activated.
A01
A01 A02 A03 A04 A05 A06