Filter
Top Products
VIPERLINK
50
Installing ViperLink
Use the ViperLink CD to install ViperLink software onto a personal
computer. The ViperLink CD is only available with the purchase of LS6-
PCKIT.
Insert the CD into a personal computer. The installation program will begin
automatically. Follow the instructions in the installation wizard in order to
complete the installation process.
Using ViperLink
To use ViperLink software with the Viper™ LS6 printer:
1. Connect the serial cable (included with the LS6-PCKIT) to a personal
computer at the 9 pin serial port.
2. Connect the serial cable to the Viper™ LS6 at the RS232 port.
3. Turn ON the Viper™ LS6.
4. Press the key to access the setup menu.
5. Use the up or down directional arrow keys to highlight Utilities.
6. Use the right or left directional arrow keys to select ViperLink.
7. Press the key to begin using the ViperLink utility. The LS6 is now
ready to communicate to a personal computer.
8. Open ViperLink software on a personal computer.
To upload or download label files or data lists, select:
Transfer -> File Transfer
Choose COM 1 or COM 2
Choose to Upload or Download a file.