Filter
Top Products
PRINTER CLEANING INSTRUCTIONS
55
Cleaning the Print Head and Drive Roller
The print head should be cleaned regularly, and more often in harsh
environments. The drive roller should be cleaned whenever foreign matter,
such as dust or adhesive, is present.
1. Turn OFF power to printer.
2. Open the ribbon lock knob.
3. Remove any label media from print path.
4. Remove the ribbon.
5. Power the printer on .
6. Position ribbon lock knob in locked position.
7. Extend width guide to greatest width.
8. Insert cleaning card (Part No.LS6-CLN) until resistance is met.
9. Press to feed cleaning card completely through printer.
10. Flip cleaning card over and repeat steps 8 & 9 as necessary.
11. If there are large deposits on the drive rollers, soak cotton swab in
Isopropyl Alcohol (Rubbing Alcohol) and remove deposits from rubber
roller with sweeping motion.
Caution: LS6-CLN (cleaning card) contains
alcohol, keep away from flames.