129
Camera Settings
8
Registering Sounds for Start-Up, Operations,
Self-Timer and the Shutter
z Use the W or X button to select (Record)
and press the SET button. Recording will start
and automatically stop when the time is
exceeded. Recording times for each item are
as follows:
z Use the W or X button to select (Register) and press the SET button.
5 Use the W or X button to select [OK] and press the SET
button.
Data that can be Registered as My Camera Settings
My Camera settings should conform to the data types below. Memory
card images shot with this camera in any of the following formats can be
registered:
z
Start-up Image
- Compression Method: JPEG (Baseline JPEG)
- Sampling Rate: 4:2:0 or 4:2:2
- Dimensions: (320 x 240 pixels)
z
Start-up, Operation, Self-timer and Shutter Sounds
- Compression Method: WAVE (monaural)
- Quantization Bits: 8 bit
- Sampling Frequency: 11.025 kHz or 8.000 kHz
Start-up Sound: 1 sec. Operation Sound: 0.3 sec.
Self-timer Sound: 2 sec. Shutter Sound: 0.3 sec.
z Movies and sounds recorded using the Sound Memo function
(p. 115) or Sound Recorder function (p. 116) cannot be registered
as My Camera settings.
z The prior setting is erased when a new My Camera setting is
added.
A computer is required to restore the My Camera Settings to the defaults.
Use the supplied software (ZoomBrowser EX/ImageBrowser) to add the
default settings to the camera.