Filter
Top Products
19
Preparing the Camera
1
2 Insert the memory card.
z Push as indicated on the back of the
memory card slot cover until it clicks into
place.
z Do not touch or allow metal objects to
contact the terminals on the back of the
memory card.
3 Close the memory card slot cover.
To Remove the Memory Card
Push in the memory card until you hear it click,
then release it.
z When the indicator blinks red, the camera is writing, reading,
erasing or transmitting an image to or from the card. During this
time, do not do any of the following, it could corrupt the image or
audio data.
- Subject the camera body to vibration or shocks.
- Turn the camera's power off, or open the memory card slot cover.
z Please note that memory cards formatted with other
manufacturers' cameras or a computer, or formatted or edited
with application programs, may slow down writing to the memory
card or may not operate correctly in the camera.
z You are recommended to use memory cards that have been
formatted in your camera (p. 20). The card supplied with the
camera may be used without further formatting.
Memory Cards and Estimated Capacities (Recordable Images) (p. 170)
Front
a
b