Canon S2 IS Digital Camera User Manual


 
160
Using the Power Kits (Sold Separately)
Using Rechargeable Batteries (Battery/Charger Kit CBK4-200)
Included are the battery charger and four rechargeable AA-size NiMH
(nickel metal hydride) batteries. Charge batteries as shown below.
z Leaving it in the flash could lead to the battery leaking and
damaging the flash. Remove the battery from the flash and store
it in a dry and cool location if you will not use it for extended
periods.
z Fasten the attachment screws securely so that they do not
loosen. Failure to do so may lead to the dropping of the camera
and flash resulting in damage to both.
Before affixing the bracket to the flash, check that the lithium battery
(CR123A or DL123) is installed.
To illuminate the subjects properly, install the flash so that it is up
against the side of the camera and parallel with the camera's front
panel.
A tripod can be used even when the flash is attached.
Charge Indicator