Filter
Top Products
133
Additional Features
9
Windows
1 Install the driver and bundled software applications from
the Canon Digital Camera Solution Disk (only the first
time).
Please see the Software Starter Guide for the installation procedures.
2 Use the supplied interface cable to connect the
computer's USB port to the camera's DIGITAL terminal.
z With your fingernail on the upper edge of the camera's DIGITAL terminal
cover, pull it forward and plug the interface cable in all the way.
IMPORTANT
You must install the software and driver bundled on the
supplied Canon Digital Camera Solution Disk onto your
computer before connecting the camera to the computer.
z The camera will not operate correctly if you connect it to your
computer before installing the driver and software. If this
happens, please refer to the Troubleshooting section of the
Software Starter Guide.
z Even when system requirements are met, not all computer
functions can be guaranteed.
You do not need to turn off the camera or computer power when
making a USB connection.
Please refer to your computer's manual for information regarding the
location of the USB port.
Fully charged batteries or the Compact Power Adapter Kit ACK900
(sold separately) is recommended to power the camera when
connected to a computer (p. 16, 160).