Filter
Top Products
60
Changing the Delay Time and Number of Shots (Custom Timer)
You can set the self-timer delay and number of shots to be taken.
1 In the [ (Rec.)] menu, select
[Self-timer].
z Selecting Menus and Settings (p. 73)
z These settings are not available when
(My Colors), (Stitch Assist) or
(Movie) is displayed.
2 Select and press the SET button.
3 Select the timer delay and number
of shots.
c Use the W or X button on the omni
selector to set the delay.
Timer delay settings: 0 to 10, 15, 20 or 30
seconds
d Use the T button on the omni selector to select the [No. of Shots], and
select the delay with the W or X button.
No. of shots: 1 to 10
4 Press the SET button.
When set for multiple shots, shooting automatically stops when the
memory card is full.
When set for multiple shots, exposure and white balance are set and
locked with the first shot, and shooting occurs at the same speed as for
high-speed continuous shooting
(p. 62)
. Between shots, the beep sounds
and the self-timer lamp blinks. Shooting may slow down while the flash is
charging and when internal memory becomes full.