Filter
Top Products
155
Appendix
10
Noise displays on the LCD monitor. Subject's movements on LCD monitor
are irregular.
Camera automatically
lightened the image
displayed on the LCD
monitor to make it easier
to see when shooting in a
dark area.
z
There is no effect on the recorded image.
See Night Display (p. 28)
White dots appear on the image.
Light from the flash has
reflected off dust particles
or insects in the air. This
occurs more frequently in
the following conditions:
z
When shooting at the
wide angle end.
z
When shooting with a
high aperture value in the
aperture-priority AE
mode.
z
This is a phenomenon that occurs with digital cameras and does
not constitute a malfunction.
Flash does not fire
Flash is set to off.
z
Raise the flash so that it can fire.
See Using the Flash (p. 40)
Image not showing on TV monitor
Incorrect video system
setting.
z
Set the video system to the appropriate setting, NTSC or PAL, for
your TV.
Shooting mode set to
(Stitch Assist).
z
The output will not appear on a TV monitor in (Stitch Assist)
mode. Cancel the Stitch Assist mode.
Reading images from the memory card is slow, or recording images to the
memory card takes a long time
Memory card was
formatted in another
device.
z
Use a memory card formatted with this camera.
See Formatting a Memory Card (p. 20)