Filter
Top Products
24
Switching Between Shooting and Playback
You can quickly switch between Shooting mode and Playback mode. This
is convenient when you wish to shoot again after checking or deleting an
image immediately after it is shot.
Shooting Mode Playback Mode
Turn the mode lever to (Playback) while pressing the release button
(p. 23).
z
The camera switches to Playback mode, but the lens does not retract (the
lens will retract if you turn the mode lever to (Playback) once more).
Shooting Mode Playback Mode
Remove the lens cap and press the shutter button halfway.
Or turn the mode lever to (Rec.) while pressing the release button
(p. 23).
Setting the Date and Time
When you turn on the camera the first time, and when the lithium coin-
type battery charge is low, the [Date/Time] menu appears.
1 Turn the camera on
(p. 23)
, press the MENU button, and
then use the
X
button on the omni selector to select the
[ (Setup)] menu.
The [ (Setup)] menu appears.
Setting the date and time settings does not cause the date/time stamp
to appear on images. For printing images with the date on them, refer
to the Direct Print User Guide or Software Starter Guide.
Replacing the Date Battery (p. 164)