Filter
Top Products
54
1 Turn the mode dial to .
2 Use the W or X button on the omni
selector to select the shooting
sequence, then press the SET
button.
The shooting sequence is set.
You can also press the shutter button directly
to shoot without pressing the SET button.
3 Shoot the first frame in the
sequence.
The exposure and white balance settings are
set and locked with the first image.
See page 184 for settings that can be changed in this mode.
Digital zoom is not available.
A custom white balance (p. 92) setting cannot be set in (Stitch
Assist mode). To use a custom white balance setting, first set it in
another shooting mode.
The settings for the first image are used to take subsequent images in
the sequence.
Even when connected to a TV, the image displayed on the TV cannot
be shot.