Filter
Top Products
149
Appendix
10
List of Messages
The following messages may appear on the LCD monitor (or viewfinder)
during shooting or playback.
Please refer to the Direct Print User Guide for the messages that display
during a printer connection.
Busy...
Image is being recorded to, or read from, memory card. Playback mode is starting.
Resetting all the camera and menu settings to default.
No memory card
You attempted to shoot or play back images without an memory card installed.
Card locked!
Memory card is write- protected.
(p. 18)
Cannot record
You attempted to shoot an image without a memory card installed.
Memory card error!
Memory card has experienced an anomaly.
Memory card full
Memory card is full of images or sounds and no more can be recorded or saved. Also, no more
image settings (such as slide show and print settings) or sound memos can be recorded.
Naming error!
The image could not be created because there is an image with the same name as the
directory that the camera is attempting to create, the highest possible file number has already
been reached, or recorded sound files have reached the maximum capacity of the memory
card. In the Set up menu, please set [File No. Reset] to [On]. After you save all the images or
sounds you wish to retain onto a computer, format the memory card
(p. 20)
. Please note that
formatting will erase all the existing images and other data.
Change the batteries.
Battery charge is insufficient to operate the camera. Replace with new AA-size alkaline
batteries
(p. 16)
or fully charged Canon AA-size NiMH batteries (be sure to replace all the
batteries at the same time).
No image.
No images recorded on memory card.
Image too large.
You attempted to play back an image larger than 4992 x 3328 pixels or with a large data size.
Incompatible JPEG format.
You attempted to play back an incompatible JPEG image.
Appendix