Filter
Top Products
140
2 Connect the Stereo/Video
Cable to the camera's A/V
OUT terminal.
z With your fingernail on the left edge
of the camera's DIGITAL terminal
cover, pull it forward to open it, and
plug the Stereo/Video Cable in all the way.
z Treat the connector area with great care when plugging and unplugging
the cable.
3 Plug the other ends
of the Stereo/Video
Cable into the
VIDEO IN and
AUDIO IN jacks on
the TV.
4 Turn on the TV and switch it to Video mode.
5 Power on the camera in Shooting mode or Playback
mode (p. 23).
z The image will appear on the TV. Shoot or play back images as usual.
z Press the DISP. button when images are not being displayed on the TV
when shooting.
No image will appear on the LCD monitor (or viewfinder) when the
camera is connected to a TV monitor.
Refer to p. 80, for instructions regarding the video output signal.
A TV set cannot be used in the (Stitch Assist) mode.
To the Audio In Jack
Plug (Left) (White)
To the Video In Jack
Plug (Yellow)
To the Audio In Jack
Plug (Right) (Red)