Filter
Top Products
147
Additional Features
9
Selecting Images for Transferring
There are two ways to select images.
z
Singly
z
All images on a memory card
1
In the [ (Play)] menu, select
[Transfer Order] and press the SET
button.
See Selecting Menus and Settings (p. 73).
2 Use the
W
or
X
button to select
[Order] and press the SET button.
All transfer settings for the image are canceled
when you select [Reset].
3 Select images for transferring.
Single Images
z Select an image with the W or X button and
mark or remove marks from images using the
SET button. A checkmark displays on selected
images.
z When you press the JUMP button, the Jump
Bar is displayed to help with searching (p. 46).
Press the SET button after the MENU button to
select and deselect, and to remove the Jump Bar.
z After changing to Index playback (nine-image display) by turning the
zoom lever to the side, you can select images in the same way (if you
turn the zoom lever to the side again, the camera jumps nine images
at a time. Before selecting or deselecting, turn the zoom lever to to
remove the Jump Bar).