Canon S2 IS Digital Camera User Manual


 
166
Specifications
All data is based on Canon's standard testing methods. Subject to change
without notice.
PowerShot S2 IS
Camera Effective Pixels : Approx. 5.0 million
Image Sensor : 1/2.5 -inch CCD (Total number of pixels: Approx 5.3 million)
Lens : 6.0 (W) - 72.0 (T) mm (35 mm film equivalent: 36 - 432 mm)
f/2.7 (W) - f/3.5 (T)
Digital Zoom : Approx. 4.0x (Up to approx. 48x in combination with the optical
zoom)
Viewfinder : Color LCD viewfinder Picture coverage rate 100%
Dioptric Adjustment -5.5 - +1.5 m
-1
(dpt)
LCD Monitor : 1.8-inch, low-temperature polycrystalline silicon
TFT color LCD (115,000 pixels, picture coverage 100%)
AF System : TTL autofocus (continuous or single)
Focus lock and Manual focus are available
Focusing frame: 1-point AF (any position is available)
Shooting Distance
(from tip of lens)
: Normal AF: 50 cm (1.6 ft.) - infinity (W)/ 90 cm (3.0 ft.) - infinity (T)
Macro: 10 - 50 cm (3.9 in. - 1.6 ft. (W))
Super Macro: 0 - 10 cm (0 - 3.9 in.) (W)
Shutter : Mechanical shutter + electronic shutter
Shutter Speeds : 15 - 1/3200 sec.
z
The shutter speed varies according to the shooting mode.
z
1.3 sec. or slower shutter speeds are available in Shutter-
priority mode or Manual mode.
z
Slow shutter speeds of 15 to 1.3 sec. or slower operate with
noise reduction.
Light Metering System : Evaluative, Center-weighted average or Spot (Center or AF-point)
Exposure Control
System
: Program AE/Shutter Speed-priority AE/
Aperture-priority AE /Manual exposure control AE lock is (AEB)
and Safety Shift is available.
Exposure
Compensation
: ± 2.0 stops in 1/3-stop increments Auto exposure bracketing
(AEB) and Safety Shift is available.
ISO Speed : Auto*, ISO 50/100/200/400 equivalent
* Camera automatically sets the optimal speed.
White Balance : TTL auto, pre-set (available settings: Daylight, Cloudy, Tungsten,
Fluorescent, Fluorescent H or Flash) or custom
Built-in Flash : Auto*, on*, off
* Red-eye reduction is available.
Appendix
(W): Wide angle (T): Telephoto