Filter
Top Products
3. Fold a sheet of A4 or Letter-sized plain paper in half
widthwise, and then unfold it.
4. Load this and only this sheet of paper in the Auto
Sheet Feeder with the open side to the front.
5. Set the Paper Thickness Lever to the left.
6. Hold down the RESUME/CANCEL button and
release it when the POWER lamp flashes green five
times.
The paper cleans the inside of the printer as it feeds
through the printer.
If the ejected paper is smudged, clean the inside of the
printer again.
If the problem is not resolved after performing cleaning
twice, the protrusions inside the printer may be stained.
Clean them according to instructions. See
Cleaning the
Protrusions Inside the Printer.
1 Make sure that the printer is turned on, and then remove
any paper from the Auto Sheet Feeder.
2 Open the Front Feeder and extend the Paper Output
Support.
3 Fold a single sheet of A4 or Letter-sized plain paper in half
widthwise, and then unfold the paper.
4 Load this and only this sheet of paper in the Auto Sheet
Feeder with the open side to the front.
Set the Paper Thickness Lever to the left.
108