Filter
Top Products
performed until the ink absorber is
replaced.
Nine flashes: No
response from
connected digital
camera or video
camcorder. /
Connected digital
camera or video
camcorder is not
compatible with
this printer.
Disconnect the cable connecting the
printer and the device, and then
reconnect it.
Depending on the model or brand of
your device, you may have to select a
PictBridge-compliant print mode on the
device before connecting it to the
printer. You may also have to turn on
the camera or select Play mode
manually after connecting the device to
the printer.
Perform necessary operations
according your device's instruction
manual before reconnecting it to the
printer.
If the error is still not resolved, there is a
possibility that you are using a digital
camera or digital video camcorder that
is not supported by this printer. Use a
digital camera or digital video
camcorder compatible with this printer.
Thirteen Flashes:
Ink level cannot be
detected.
The remaining ink level cannot be
correctly detected.
Replace the ink tank and close the Top
Cover.
Printing with an ink tank that was once
empty may damage the printer.
If you want to continue printing in this
condition, you need to release the
function for detecting the remaining ink
level. Press and hold the RESUME/
CANCEL button for at least 5 seconds,
and then release it.
* With this operation, releasing the
function for detecting the remaining ink
level is memorized. Please be advised
that Canon shall not be liable for any
printer malfunction or damage caused
by refilled ink tanks.
See
Replacing an Ink Tank.
165