Filter
Top Products
If the dirt is hard to remove, slightly
moisten the cotton swab with water.
Paper loaded in the Front Feeder
will gradually feed and eject as you
manually rotate the roller. Remove
ejected paper. If you run out of paper
while cleaning, reload the paper in
the Front Feeder.
(5) Reattach the Rear Cover.
Hold the Rear Cover so that the Rear
Cover Lever comes to the left. Align
the protrusions at the right edge of the
cover with the slots at the rear of the
printer and press on the lever to
reattach the Rear Cover.
Important
Press firmly on the Rear Cover until it is
fit squarely in the rear of the printer. If
the Rear Cover is not reattached
properly, paper may not be fed properly
and cause paper jams.
Paper not loaded
properly.
Make sure of the following when you
load paper in the printer.
When loading two or more sheets
of paper, align the edges of the
sheets before loading.
Always load the paper in portrait
orientation, either in the Auto Sheet
Feeder or the Front Feeder,
regardless of the printing orientation.
When loading paper in the Auto
Sheet Feeder, load the paper with the
print side facing UP. Align the right
edge of the paper stack against the
Cover Guide and slide the Paper
Guide so that it just touches the left
156