Filter
Top Products
Your printer
is not
selected in
the printer
driver.
The printer will not print properly if you are using a
driver for a different printer.
In Windows, make sure that Canon iP3300 is
selected in the Print dialog box.
On a Macintosh, make sure that iP3300 is
selected in Printer in the Print dialog box.
Note
To make your printer the one selected by default,
select Set as Default Printer (Windows) or Make
Default (Macintosh).
The printer
port is not
configured
appropriately.
Set "USBnnn" ("MPUSBPRNnn" in Windows Me
or Windows 98), where "n" is a number, as the
printer port.
(1) Click Start > Control Panel > Printers
and Other Hardware > Printers and Faxes.
In non-XP Windows, click Start > Settings >
Printers.
(2) Click the Canon iP3300 icon.
(3) Open the File menu and select
Properties.
(4) Click the Ports tab (the Details tab in
Windows Me or Windows 98) to confirm the
port settings. Modify them if necessary.
Printing Stops Before It Is Completed
Cause Action
The printer has
been printing
continuously over
a long period.
If the printer has been printing
continuously for a long time, the Print
Head may overheat. To protect the Print
Head, the printer may stop printing at a
line break for a period of time and then
resume printing.
In this case, interrupt your print session
at a convenient time and turn the printer
off for at least 15 minutes.
Additionally, if the printer has been
printing graphics or photos with intense
colors continuously over a period of
148