Filter
Top Products
the error, see ALARM Lamp Flashes
Orange.
Printer is not
connected
properly.
Make sure that the USB cable is
plugged in securely to the computer and
the printer.
If you are using a relay device
such as a USB hub, disconnect it,
connect the printer directly to the
computer, and try printing again. If
printing starts normally, there is a
problem with the relay device.
Consult the reseller of the relay
device for details.
There could also be a problem with
the USB cable. Replace the USB
cable and try printing again.
Your printer is not
selected in Printer
on the Print dialog
box.
Select iP3300 in Printer on the Print
dialog box.
If iP3300 does not appear in Printer,
follow the procedure below to check that
the driver for your printer is installed to
your computer.
(1) Select Print and Fax
Preferences from Printer.
In Mac OS X v.10.2.8 or 10.3.x, select
Edit Printer List from Printer.
(2) Check that iP3300 is displayed
in the list of printers and that the
check box is selected.
In Mac OS X v.10.2.8, check that
iP3300 is displayed in the Printer
List.
(3) If iP3300 is not displayed, click
Add(+) to add the printer.
If you cannot add the printer, follow the
procedure described in the Easy Setup
Instructions to reinstall the printer driver.
Error No.: 1700/1710 Is Displayed
170