Filter
Top Products
sheets of paper you load at a time to around half (around
0.2 inches / 5 mm in paper stack height).
Do not stack more than 50 sheets in the Paper Output
Tray.
When Printing on 5" x 7", 4" x 6", or 2.13" x 3.39" (Credit
Card-sized) paper
Load paper only in the Auto Sheet Feeder.
You can load up to 20 sheets of 4" x 6" or 2.13" x
3.39" (credit card-sized) paper and 10 sheets of 5" x 7"
paper.
We recommend using genuine Canon photo media
when printing photographs.
See Printing Media.
Loading Paper in the Auto Sheet Feeder
1 Flatten the four corners of the paper before loading it.
Note
Align the edges of paper neatly before loading. Loading
paper without aligning the edges may cause paper jams.
If paper is curled, hold the opposing curled corners and
gently bend them in the opposite direction until the paper
becomes completely flat. See Paper is curled..
To avoid curling, handle paper as follows.
- Put unused paper back into the package and keep
them on a level surface.
- Take out only the necessary number of sheets from the
package, just before printing.
28