Filter
Top Products
(1) Insert the front end of the ink tank into the Print Head.
*1 Make sure the position of the tank matches the label.
(2) Press on the
mark on the ink tank until the ink tank snaps firmly
into place.
(3) Make sure that the ink lamp lights up red.
Important
The printer cannot be used unless all the ink tanks are
installed.
6 Close the Top Cover.
Note
If the ALARM lamp still flashes orange after the Top
Cover is closed, see
ALARM Lamp Flashes Orange.
When you start printing after replacing the ink tank, Print
Head Cleaning is performed automatically. Do not perform
any other operations until Print Head Cleaning finishes.
The POWER lamp flashes green during cleaning.
Keeping the Best Printing Results
To avoid drying of the Print Head and clogging of the nozzles, note the following.
When You Turn Off the Printer
78