Filter
Top Products
Working around
the printer
Do not use highly flammable sprays
near the printer.
This could cause a fire or electric
shock if the spray comes into contact
with electrical components inside the
printer.
Caution
You may cause injury or damage the printer if you ignore any of these
safety precautions.
Choosing a
location
Do not install the printer in a location
that is unstable or subject to excessive
vibration.
Do not install the printer in locations that
are very humid or dusty, in direct
sunlight, outdoors, or close to a heating
source.
To avoid the risk of fire or electric
shocks, install the printer in a location
with an ambient temperature range of 5°
C to 35°C (41°F to 95°F) and humidity
of 10% to 90% (condensation free).
Do not place the printer on a thick rug or
carpet.
Do not place the printer with its back
attached to the wall.
Power supply
Ensure that the
area around the
power outlet is
kept clear at all
times so you can
easily unplug the
power cord if necessary.
Never remove
the plug by
pulling on the
cord.
11