Filter
Top Products
2-3
Cisco Video Surveillance IP PTZ Dome Camera User Guide, Cisco 2900 Series IP Dome
OL-24281-01
Chapter 2 Operation
Live Video Page
PTZ Controls
The PTZ controls are viewable only after you have logged on to the device.
Ta ble 2-1 Live Video Page Icons
Icon Description
Show Device List: Displays a list of viewable cameras connected to the same virtual local
area network (VLAN) as the camera to which you are logged on.
Disable Viewer: Closes the live view window.
1 x 1 Mode: Displays a single video pane.
2 x 2 Mode: Displays 4 video panes in rows of two.
3 x 3 Mode: Displays 9 video panes in rows of three.
4 x 4 Mode: Displays 16 video panes in rows of four.
Select Stream: Selects the viewable video stream that is displayed in live view (primary
or secondary) and selects unicast or multicast settings.
Maximize Viewing Area: Scales the image to the full size of the browser. To resize the
video pane to normal view, click the Show Toolbar button in the upper-right corner of the
window.
Show Toolbar: Returns the window to normal view. This option is only available after the
window has been set to maximize the viewing area.
Open Stream in New Window: Opens the video in a scalable, independent window.
Opening the video in a separate window allows you to view the video while other
applications are running. This window can be minimized, maximized, or closed using the
title bar buttons of the active window. The window can also be resized by dragging the
lower-right corner of the window.
Take a Snapshot: Captures the image displayed in the video pane and then saves it as a
JPEG file.
Center Viewing Area: Centers the camera on an area in the video pane. To center a
viewing area, click the desired location in the video pane.
This icon is available only when the QuickView Stream is selected.
Pan and Tilt: Controls the pan and tilt functions. Click and drag the mouse to the left or
right to pan the camera. Click and drag the mouse up or down to tilt the camera.
This icon is available only when the QuickView Stream is selected.
Resize Viewing Area: Zooms in on an area of interest. Click and drag the mouse over the
view pane to zoom in on an object.
This icon is available only when the QuickView Stream is selected.