Filter
Top Products
Instruction Manual
748467-A
January 2002
Rosemount Analytical Inc. A Division of Emerson Process Management Description and Specifications 1-9
Model MicroCEM
1-5 CENTRAL PROCESSING UNIT
The CPU is an Embedded Pentium-like AT
Computer in 5.75” x 8” form factor. The pe-
ripherals integrated on board are: SVGA, 4
serial ports and one parallel port, Fast
Ethernet ctrl., IDE, Keyboard, Mouse, 2 USB.
The module is built around the Intel Tillamook
processor and is equipped with 64MB
SDRAM. The module also integrates one
socket for SSD that performs like an HDD unit
and can be used to store the operating sys-
tem, the user’s programs and the data files.
Other peripherals available on board are the
Floppy disk controller, the parallel port. The
CPU is shown in Figure 1-7.
a. Embedded Enhanced Bios
Award, 256KB Flash Bios.The Bios is
immediately activated when you first turn
on the system. The Bios reads system
configuratio information in CMOS RAM
and begins the process of checking out
the system.
Figure 1-7. CPU
b. Specifications
Architecture: ................................. PC/AT Compatible
Dimensions: .................................. 5.75” x 8”
Processor: .................................... Intel Tillamook processor - 266MHz
Memory: ........................................ 64 MB SDRAM
Ram/Rom disk: ............................. 1 x 32 pin socket (max. 288MB)
Operating System: ........................ WinNT
BIOS: ............................................ Standard with embedded extensions
Interfaces: ..................................... IDE ctrl
Floppy ctrl
SVGA-CRT
10/100 Mbps Fast Ethernet
2 USB ports
4 RS232 serial ports (one can be 485)
Parallel port (bi-directional EPP-ECP)
Keyboard PS/2
Mouse PS/2
Bus: .............................................. AT bus according to PC/104 spec.
Power Supply: .............................. AT/ATX
Connectors: .................................. COM1-4, SVGA, USB 1 and 2, PS/2 Mouse/Keyboard, ATX Power,
Parallel, IDE, Floppy, and Fast Ethernet