Emerson MicroCEM Camera Accessories User Manual


 
Instruction Manual
748467-A
January 2002
5-4 Maintenance and Service Rosemount Analytical Inc. A Division of Emerson Process Management
Model MicroCEM
5-3 OZONE GENERATOR
To replace the ozonator, remove the two large
straps and all tie-wraps, and disconnect the
one electrical connection. Reassemble in re-
verse order.
5-4 PERSONALITY MODULES
There are five different personality modules.
Depending on your unit, you may have three,
four or five modules installed. These person-
ality modules are installed on a custom back-
plane. See Figure 5-3.
To remove any on the personality modules.
Remove cables form module to be removed,
there are two screws at the bottom of each
module. You will have to loosen each screw
before you can remove the personality mod-
ule.
Tag each cable and its location before dis-
connecting any wiring. This helps in re-
assembly.
Figure 5-3. Personality Modules and Backplane.
EXIO
AUX
PDD
NDIR
PMD