Emerson MicroCEM Camera Accessories User Manual


 
Instruction Manual
748467-A
January 2002
Rosemount Analytical Inc. A Division of Emerson Process Management Maintenance and Service 5-3
Model MicroCEM
5-2 CONVERTER
To replace the converter or sensor, discon-
nect the two pneumatic tubes and two electri-
cal connections. Unlace the heater blanket,
and remove the converter. Reassemble in re-
verse order, ensuring that the converter is ori-
ented with the glass cloth at the bottom and
the sensor is oriented correctly inside the
heater jacket.
Figure 5-2. Converter Assembly
ASSEMBLED SIDE VIEW
Converter
Tube 655227
Wrap with
aluminum foil
Glass
Cloth
Sensor
Heater
Jacket
655228
Sensor
655282