Filter
Top Products
Rev. D General Information 1-3
TM-P60 Technical Reference Guide
1.2.2 Related materials for TM-P60
TM-P60 has the related materials listed in the following table.
Please contact your dealer to get these.
1.3 Consumables
1.3.1 Roll paper
Roll paper widths are 60 mm and 58 mm {2.36"/2.28"}.
Note:
When you use 60mm width roll paper, you have to change the printer setting. See “2.5.4 Adjusting Roll
paper width” (page 2-13)
Category Name Description
Options
PS-10 This is an exclusive AC adapter for battery charging. It is able to
connect to TM-P60 directly.
The charging period: 4 hours.
OT-CH60 This is an exclusive battery charger. To use it you must take the
battery out of the TM-P60.
The charging period: 2.5 hours.
OT-RS60 This is to connect TM-P60 and host PC with serial connection.
LIP-2500 This is a spare battery. It is the as same as ithe ncluded one.
OT-ST60 This is a shoulder strap.
Consumables Roll Paper This is required to print.
Manuals
User’s Manual This manual is packed in the carton box.
Technical Reference Guide This Manual.
FAQ about ESC/POS
command
This Manual is Quick Reference of ESC/POS command with a
simple sample program & Tips.
ESC/POS Application
Programming Guide
This Manual is a Command Reference Guide of ESC/POS
command, including some sample programs & Tips.
Command Comparison
between the TM-T88II/T88III
and the TM-P60
This provides detailed command comparison information
among the printers.
Drivers
(WIndows
environment)
OPOS ADK This provides the OCX driver which is based upon OPOS. It has
manuals, sample programs, and TMFlogo utility.
Advanced Printer Driver This is a Windows Driver. This Driver has a manual, sample
programs, and utilities to use the driver.
Utilities
(Windows
environment)
Memory Switch setting
Utility
This is a utility to adjust the setting (Memory Switch) of this printer.
See “2.5.3 Memory Switches” (page 2-11) for details.
TMFlogo This is a utility to store “NV graphics“ into this printer. It helps
printing “NV graphics.”
TMNetWinConfig Ver. 2.0 This is a utility to set the wireless LAN property.