Filter
Top Products
4-4 Application Development Information Rev. D
4.3.2 Advanced Printer Driver
In the Advanced Printer Driver, you have to use “Control font A.” The procedure is described
below.
Note
See the user’s manual of the Advanced Printer driver for detail of the utility “EPSON Control font.“
1. Open the properties of printer.
2. Click the “utility“ tab.
3. Click the “EPSON Control FontA“ button.
4. Click the “operation“ tab.
5. Edit a control font. The following table shows example definitions.
6. When the printer receives data of the defined control font A, the printer beeps as described.
4.3.3 ESC/POS command
The beeper function is able to be operated by commands. See the “ESC/POS Application
Programming Guide“ for details.
4.4 Various Status Categories
This printer is able to send various status reports to the host PC. This section describes the kind
of statuses and handling.
Deined Command data Tone Description
1B284104003031010A
1280Hz 1000ms beeping
1B284104003032010A
4100Hz 1000ms beeping
1B284104003033010A
1280Hz 200ms beeping
1B284104003034010A
4100Hz 200ms beeping
1B284104003035010A
1280Hz 200ms beeping -> 200ms off -> 200ms beeping
1B284104003036010A
4100Hz 200ms beeping -> 200ms off -> 200ms beeping
1B284104003037010A
1280Hz 500ms beeping
1B284104003038010A
4100Hz 500ms beeping
1B284104003039010A
1280Hz 200ms beeping -> 200ms off -> 200ms beeping ->
200ms off -> 200ms beeping
1B284104003039010A
4100Hz 200ms beeping -> 200ms off -> 200ms beeping ->
200ms off -> 200ms beeping
Status Categories Description