Filter
Top Products
Rev. D Wireless LAN Setup Detailed Information B-1
TM-P60 Technical Reference Guide
Appendix B
Wireless LAN Setup Detailed Information
This appendix describes setting methods for wireless LAN. There are two methods: using
TMNetWinConfig (utility software), and using your web browser. To use either method, you
have to install the TCP/IP protocol into your operating system.
For instructions on installing TCP/IP protocol see “Setting the TCP/IP protocol in Your
Operating System” on page B-1.
For instructions on the wireless LAN setting of the TM-P60 using TMNetWinConfig (utility), see
“TMNetWinConfig” on page B-4.
For instructions on wireless LAN setting of the TM-P60 using your web browser see “Setting
Using a Web Browser” on page B-28.
B.1 Setting the TCP/IP protocol in Your Operating System
To set the IP address, you need to install the TCP/IP protocol in your operating system. How to
set the TCP/IP protocol is explained for Windows 2000 professional and Windows XP
professional.
B.1.1 Windows 2000
1. Double-click the Network and Dial Set Up icon in the Control Panel; then click Local Area
Connection Status.