Filter
Top Products
Rev. D Setup 2-3
TM-P60 Technical Reference Guide
Note:
The FEED button can be disabled by using an ESC/POS command. Refer to “ESC/POS Application
Programming Guide” for details.
2.1.3 Beeper Function
This printer has a “beeper“ function. This function causes beeping in specified situations. The
situations are the following:
❏ The battery remaining is low (Memory switch can enable/disable this function)
❏ The printer can’t find any Access point (wireless LAN). (Memory switch can enable/disable
this function)
❏ Roll paper is out (Memory switch can enable/disable this function)
❏ A error has occurred except “printer temperature error.“ (Memory switch can enable/
disable this function)
❏ Start of status sheet printing
❏ The radio field intensity check is started (reply for pressing FEED button)
❏ The radio field intensity check is processing
Note:
About memory switch, see “2.5.3 Memory Switches” (page 2-11).
About status sheet, see “2.6.2 Confirming the current LAN setting of the printer” (page 2-15).
About radio field intensity check processing, see “3.6 Radio Field Intensity Check Mode” (page 3-5).
The beeper can be beeped by a command from an application program.
See “4.3 Beeper function” (page 4-3)