2-18 Setup Rev. D
2.6.5.1 When you use the Utility (TMNetWinConfig) to set up the connection
You can confirm the connection this way when you select either connection (wireless LAN, or
RS-232C)
1. Run “TMNetWinConfig“ on the host PC.
Note:
If the utility hasn’t been installed on the host PC, install now.
2. Turn on your printer.
3. Confirm the printer is shown in the list view.
Note:
If the printer isn’t shown in the list view, check following item. See Appendix B for details of the
utility function.
• Turn the printer on.
• Without connecting a serial cable to the TM-P60, confirm that the “Search Method,“ and
“Search Option IP“ are correct. You have to set it to correspond to the printer.
“Search Path“; Menu:Tool -> “Search Method.“
(You should check “Search Path selection: select All“)
The your printer is shown in here.