Fujitsu C150-E049-02EN Photo Scanner User Manual


 
M3099GX/GH OEM Manual 4-7
BASIC
OPERATION
Buttons
[Manual] button
This button is used to select manual feed mode. By pressing this
button, setting is switched between Manual mode and ADF mode.
By pressing this button, scanner goes to manual feed mode and the
hopper elevates. The next pressing this button, scanner exit from
manual feed mode and the hopper down.
[Start]/[Stop] button
This button are used in Off-line mode. By pressing Start button in
Off-line mode, the scanner starts document feeding. By pressing
Stop button in Off-line mode, the scanner stops document feeding.
The Stop button is also used in On-line mode to cancel temporary
error condition.
[Mode 1] button
This button is used to transit to Off-line SETUP mode when Power-
on. By pressing Mode 1 button and turn on the Power switch, this
scanner starts up in SETUP mode.
[Mode 2] button
This button is used to transit to Off-line TEST mode when Power-
on. By pressing Mode 2 button and turn on the Power switch, this
scanner starts up in TEST mode. The TEST mode is used for
maintainance/diagnostic purpose. Functions are described in
M3099G IMAGE SCANNER CE MANUAL.
#04.pm5 98.2.22, 1:36 PM7