Filter
Top Products
M3099GX/GH OEM Manual B-1
SETUP MODE
APPENDIX
B
SETUP MODE
This chapter explains the setup mode of the scanner.
When you activate the setup mode, you must set as follows.
1 While pressing the [Mode 1], turn on the
power of the scanner. Then the LCD
displays Screen 1.
2 After a while the LCD displays the SETUP
MODE initial screen. (Screen 2)
3 Press the [Mode 1] to go to the SETUP
MODE menu screen. Press the [Stop] to go
to the readable status. (Screen 3)
B.1 Activating
the setup
mode
When [Mode1] button is
pressed at power-on
1 Press the [Mode1] button
2 The device goes online.
••••
▲
POWER ON
IRAS
WAIT
Warm-up
Setup
mode
1
2
B.2 Operational
transition in
the setup
mode
Warming-up Now!!
Scanner Ready
<< SETUP MODE >>
Screen 3
Screen 1
Screen 2