Fujitsu C150-E049-02EN Photo Scanner User Manual


 
M3099GX/GH OEM Manual 3-59
INTERFACE
Window Identifier: 00h(front side) or 80h(back side)
The window identifier specifies the window defined by the window
descriptor. A window is referenced by the window identifier during
data transfers and parameter updates.
Fujitsu defines for duplex scanner, window identifiers 00h to 7Fh are
used for front page and 80h to FFh are used for back page,
implicitly. This scanner supports one window for each side,
therefore, window identifier 00h for front page and window
identifier 80h for back page.
Auto: 0b (Reserved)
X-Axis Resolution:
0(400dpi), 200, 240, 300, 400 dpi (without IPC2)
0(400dpi), 50 to 400dpi at 1dpi step (with IPC2)
The x-axis resolution field specifies the resolution in the scan line
directionThe unit of measure is picture elements(pixels) per inch. A
value of zero specifies the default resolution.
Y-Axis Resolution:
0(400dpi), 200, 240, 300, 400 dpi (without IPC2)
0(400dpi), 50 to 400dpi at 1dpi step (with IPC2)
The y-axis resolution field specifies the resolution in the base line
direction The unit of measure is picture elements(pixels) per inch. A
value of zero specifies the default resolution.
X-Axis Upper Left: 0 to 14592 [1/1200 inch] for M3099GX
0 to 10368 [1/1200 inch] for M3099GH
The x-axis upper left field specifies the x-axis coordinate of the upper
left corner of the window. This coordinate is measured from the scan
line using the target’s current measurement unit divisor.
Y-Axis Upper Left: 0 to 20736 [1/1200 inch]
The y-axis upper left field specifies the y-axis coordinate of the upper
left corner of the window. This coordinate is measured from the base
line using the target’s current measurement unit divisor.
Window Width: 0 to 14592 [1/1200 inch] for M3099GX
0 to 10368 [1/1200 inch] for M3099GH
#03.pm5 98.2.22, 1:32 PM59