Filter
Top Products
M3099GX/GH OEM Manual 8-5
CLEANING
Cleaning the rollers
Cleaning the rollers with Cleaning Sheet:
1 Set the hopper table guides
to the B4 width.
2 Remove protective paper
from the cleaning sheet.
With the adhesive side up,
place the cleaning sheet on
the hopper table by aligning
it with the left guide.
3 Press [MODE2] twice,
[MODE1] once, then
[START]. (The hopper
table goes up and the
cleaning sheet is
transported.)
4 By aligning with the right
guide, place the same
cleaning sheet on the
hopper table with the
adhesive side up.
5 Transport the cleaning
sheet by the switch
operations of 3 .
6 Place a new cleaning sheet
on the hopper table with
the adhesive side down, and
repeat steps 2 to 5 .
“B4”
Lock
lever
Guide
Hopper table
FRONT
Hopper table
Right
guide
Left guide