Filter
Top Products
M3099GX/GH OEM ManualB-8
<< SETUP MODE >>
LCD CONTRAST
LCD CONTRAST
Screen 21
Screen 20
<< SETUP MODE >>
PICK SPEED SET
PICK SPEED SET
FAST SLOW
Screen 22
Screen 23
B3.6 Adjusting LCD contrast
When you adjust the LCD contrast, you must set as follows.
23 At Screen 2, press [Mode 1] six times to go
to the LCD CONTRAST screen. (Screen 20)
24 Press [Mode 2] to see Screen 21. The
number of ‘ ’ is increased and the LCD
contrast is getting darker.
25 At Screen 21, the LCD contrast is set in 16
steps each time you press [Mode 1]. When all
fields are filled by ‘ ’, next pressing [Mode
1] stars from all ‘ ’ (The lightest contrast).
26 Press [Mode 2] to see Screen 20. The settings
are stored to EEPROM.
27 When you close the setup mode, go to 9 .
B3.7 Setting pick speed
When you set the pick speed, you must set as follows.
28 At Screen 2, press [Mode 1] seven times to
go to the PICK SPEED SET screen. (Screen
22)
29 Press [Mode 2] to see Screen 23. (The
default setting is “FAST”.)
If “FAST” is displayed, the pick speed is fast.
If “SLOW” is displayed, the pick speed is
slow. The “FAST” or “SLOW” status flips
each time you press [Mode 1].
The status will be set in EEPROM
automatically.
30 If you want to return to Screen 22, press
[Mode 2]. When you close the setup mode,
go to 9 .