Filter
Top Products
3-34 M3099GX/GH OEM Manual
If an INQUIRY command is received from an initiator with a
pending unit attention condition (i.e., before the target reports
CHECK CONDITION status), the target shall perform the
INQUIRY command and shall not clear the unit attention
condition.
Standard INQUIRY Data (See ANSI SCSI-2 7.2.5.1)
This standard INQUIRY data (Table 3.12) contains 36 required
bytes, followed by a variable number of vendor-specific parameters.
Bytes 56 through 95, if returned, are reserved for future
standardization.
#03.pm5 98.2.22, 1:31 PM34