Fujitsu C150-E049-02EN Photo Scanner User Manual


 
M3099GX/GH OEM Manual B-11
SETUP MODE
38 At Screen 27, the Product-ID may be
M3099G, M3099GH or M3096G at each
time you press [Mode 1] in case of
M3099GH, and M3099G or M3096G at
each time you press [Mode 1] in case of
M3099GX.
39 Press [Mode 2] to see Screen 26. The setting
are stored to EEPROM.
40 When you close the setup mode, go to 9 .
B3.14 Setting picking start time
When you set the picking start time, you must set as follows.
41 At Screen 2, press [Mode 1] fourteen times to
go to the PICK START TIME screen.
(Screen 28)
42 Press [Mode 2] to see Screen 29. (The default
setting is 1 sec.)
43 At Screen 29, press [Mode 1] until the digit
you want to change blinks. Then press [Mode
2] until the digit changes as you want. (The
specifiable range is from 0.2 to 29.8 sec. in
0.2 sec. step.)
44 Press [Mode 1] and [Mode 2] at a time to see
Screen 28. The settings are stored to
EEPROM.
45 When you close the setup mode, go to 9 .
<< SETUP MODE >>
PICK START TIMER
PICK START TIMER
X X . X S
Screen 29
Screen 28