Filter
Top Products
3-40 M3099GX/GH OEM Manual
Table 3.15 Function
Bit
Bit 0
Bit 1
Bit 2
Bit 3
Bit 4
Bit 5
Bit 6
Bit 7
Description
Data Over Flow
Scanners that will cause data over flow sets this bit to 1. Image
scanners that will not cause data over flow set this bit to 0.
Support of Start Switch is not specified.
Binary (Black and White)
Scanners support Black and White set this bit to 1. Scanners do
not support Black and White set this bit to 0.
Dither/Halftone
Scanners support Dither/Halftone set this bit to 1. Scanners do
not support Dither/Halftone set this bit to 0.
Grayscale
Scanners support Grayscale set this bit to 1. Scanners do not
support Grayscale set this bit to 0.
Steps of gray is not specified.
Reserved (Bit 4 to 7 are Reserved in JBMS)
Binary (RGB Color)
Scanners support (RGB Color) set this bit to 1. Scanners do not
support (RGB Color) set this bit to 0.
Dither/Halftone(RGB Color)
Scanners support Dither/Halftone (RGB Color) set this bit to 1.
Scanners do not support Dither/Halftone (RGB Color)set this
bit to 0.
Grayscale(RGB Color)
Scanners support Grayscale(RGB Color) set this bit to 1.
Scanners do not support Grayscale(RGB Color) set this bit to 0.
Steps of gray is not specified.
*) Data Over Flow means when receipt of data by the initiator is
too slow, data buffer of image scanner is filled and data is not
guranteed.
Fujitsu further defines own Vital Product Data using Vendor
Specific field of JBMS. This extended Vital Product Data is used by
Device Driver to confirm which functions are supported. Current
defined data is totally 100 bytes but it will be expanded by future
functions.
#03.pm5 98.2.22, 1:32 PM40