Filter
Top Products
Chapter 6: Menu and Soft Key Reference 69 Capture Mode Menus and Soft Keys
EV Bracket Submenu
Figure 47: EV Bracket Submenu Use the EV (Exposure Value) Bracket submenu to run a script that sets the exposure bracket. Use this
when you want to try under- and over-exposing a shot to get the best exposure.
When you choose the 0.5 EV Step or 1.0 EV Step setting, live view is turned on and the message
“Bracketing” appears in the center of the top overlay bar. Additionally, the Stop Script soft key
appears as the middle soft key. All other buttons, except the shutter release button, are inactive while
the script is running.
When you press the shutter release button all the way down, the camera takes three pictures: the first
will be under-exposed by a half/full stop; the second will be nominally exposed; and the third will
be over-exposed by a half/full stop.
Table 20: EV Bracket Submenu
Tabl e 21 : EV Bracket Soft Keys
Setting Range
Off Turns off EV bracketing.
0.5 EV Step Sets the camera to capture images one half
stop above and one half stop below the
current exposure setting.
1.0 EV Step Sets the camera to capture images one full
stop above and one full stop below the
current exposure setting.
Soft Key Function
Select Places a checkmark by the script,
runs the script, then returns to
live view in Capture mode.
Exit Returns to the Photo Assist
menu without running the script.