Filter
Top Products
Chapter 7: Troubleshooting and Support 101
The camera
does not take
a picture
when I press
the Shutter
button.
You did not
press the
Shutter button
hard enough.
Press the Shutter button all the
way down.
The internal
memory or the
optional
memory card
that is installed
is full.
Transfer images from the camera
to your computer, then delete all
images in internal memory or on
the memory card (see Delete on
page 60). Or replace the card
with a new one.
The optional
memory card
that is installed
is locked.
With the camera turned off,
remove the memory card and
switch the locking tab on the card
to the unlocked position.
The flash is
recharging.
Wait until the flash has recharged
before taking another picture.
The camera is
set to the
Macro
shooting
mode and
cannot take a
picture until it
finds focus.
z Re-focus the camera (try using
Focus Lock; see
page 34).
z Make sure the subject of the
picture is within the Macro
(close-up) range (see
Using the
Shooting Modes on page 38).
The camera is
still saving the
last picture
you took.
Wait a few seconds for the
camera to finish processing the
last image before taking another
picture.
Problem Possible cause Solution