Filter
Top Products
76 HP Photosmart M305/M307 User’s Manual
• If you are connecting the camera to a printer
displaying the PictBridge logo (see logo on
right) from HP or another manufacturer, do
the following:
a. Make sure the camera’s USB Configuration setting is
set to Digital Camera (see USB Configuration on
page 83).
b. Using the USB cable that you would normally connect
between the camera and the computer, connect the
larger, flat end of the USB cable to the corresponding
connector on the PictBridge printer.
3 Open the rubber door on the side of the camera and
connect the small end of the USB cable to the USB connector
on the camera.
4 When the camera is connected to
the printer, a Print Setup menu
displays on the camera. If you
already selected images to print
using the camera HP Instant
Share Menu, the number of
images selected is shown.
Otherwise, Images: ALL is displayed.
NOTE There is a print preview in the lower right-hand corner
of the Print Setup screen showing the page layout that will
be used for printing images. This print preview updates as
you change the settings for the Print Size and Paper Size.
For PictBridge printers only: If default is displayed for the
Print Size or Paper Size, then no print preview is shown.
The printer will automatically determine the page layout
that will be used for printing images.