Filter
Top Products
42 HP Photosmart M305/M307 User’s Manual
Using the Burst Setting
Burst allows you to take up to 4 still pictures as quickly as
possible. The camera then continues taking burst pictures at a
slower rate until you release the Shutter button or the camera
runs out of memory.
NOTE The Burst setting is disabled while recording video
clips. You also cannot record audio when using the Burst
setting, but you can add an audio clip later (see Record
Audio on page 61). Also, the flash is disabled while using
the Burst setting.
1 Press the Timer/Burst
button until Burst appears in the
Image Display.
2 Frame the subject and press the Shutter button halfway
down to lock the focus and exposure. Then press the Shutter
button all the way down and hold it. The camera takes 4
pictures as quickly as possible and continues taking burst
pictures until you release the Shutter button or the camera
runs out of memory.
The Image Display remains off during the burst capture. After
the burst pictures have been taken, each image appears one at
a time on the Image Display.
If the Burst setting is anything other than the default Normal
setting, the Burst icon will appear in the Live View screen.
The Burst setting remains in effect until it is changed again or
until the camera is turned off. The camera resets to the default
Normal timer/burst setting when you turn the camera off.
NOTE To restore the timer/burst setting to what it was when
you last turned the camera off, hold down the Menu/OK
button as you turn the camera back on.