Filter
Top Products
Chapter 7: Troubleshooting and Support 113
PROCESSING... The camera is
processing data,
such as saving
the last picture
you took.
Wait a few seconds for the
camera to finish
processing before taking
another picture or pressing
another button.
CHARGING
FLASH...
The camera is
recharging the
flash.
It takes longer to charge
the flash when the battery
is low. If you see this
message a lot, you may
need to replace or
recharge the battery.
FOCUS TOO FAR
and blinking
The focus
distance is
beyond where the
camera can focus
in the Macro
shooting mode.
z Change the shooting
mode (see
Using the
Shooting Modes on
page 38).
z Move closer to the
subject, within the range
of the Macro shooting
mode (see Using the
Shooting Modes on
page 38).
FOCUS TOO
CLOSE
The focus
distance is closer
than the camera
can focus in the
Macro
shooting mode.
Move farther away from
the subject, within Macro
range
(see page 38).
Message Possible cause Solution