Filter
Top Products
82 HP Photosmart M305/M307 User’s Manual
Date & Time
This setting allows you to set the date/time format, as well as
the current date and time for the camera. This is usually done
when you first set up the camera; however, you may need to
re-set the date and time when you are travelling to different
time zones, after the camera has been without power for an
extended time, or if the date and time is incorrect.
NOTE The date/time format chosen will be used to display the
date information in Playback. Also, the format chosen in
this setting is what is used in the Date & Time Imprint
feature (see Date & Time Imprint on page 50).
1 In the Setup Menu (page 79), select Date & Time.
2 In the Date & Time sub-menu,
adjust the value of the highlighted
selection by using the
buttons.
3 Press the buttons to move to
the other selections.
4 Repeat steps 2 and 3 until the
correct date/time format, date, and time are set.
5 Press Menu/OK to save the setting and return to the
Setup Menu.
The date/time format setting remains in effect until it is
changed again, even when you turn the camera off. The date
and time settings also remain current as long as the camera
batteries that are installed have a charge, or the camera is
connected to an optional HP AC power adapter.