Filter
Top Products
Chapter 1: Getting Started 25
Camera Status Screen
A status screen appears for a few
seconds in the Image Display any
time you press the Flash ,
MODE, or
Timer/Burst buttons when Live
View is off.
As shown in the example here, a text
description of the current setting for the button that was just
pressed appears at the top of the screen. Beneath that, icons
for the current flash, shooting mode, and timer/burst settings
are shown, with the icon for the button that was just pressed
highlighted. The bottom portion of the screen shows whether a
memory card is installed (indicated by the SD icon),
power
indicator
(such as the low battery level indicator; see Power
Indicators
on page 133), the number of pictures remaining,
and the Image Quality setting (indicated in the example by
the 3MP).
Restoring Previous Settings
The flash, shooting mode, and Timer/Burst settings, as well as
some of the Capture Menu settings that you change from their
default settings do not remain set after you turn the camera off.
However, you can restore the non-default settings from the last
time the camera was on by holding down the Menu/OK button
while also sliding the
ON/OFF switch to turn the camera on.
The icons for the restored settings are then displayed in the Live
View screen.